Limit switches XC Standard – XCRE58
The XCR limit switches range is designed for hoisting and material handling applications. The XCRE58 limit switch is composed of a fixed zinc alloy body and a rotary head. The fixing is done by the body. It has a 6mm metal stay put crossed square rods lever operator with a lateral approach (2 directions). The movement of operating head is rotary. It has twice one normally closed and one normally open slow-break (break before make) contacts with positive opening operation. It has one cable entry tapped for Pg 13.5 cable gland (conforming to NF C 68-300) and it is powered by screw-clamp terminals (clamping capacity : 1 x 0.5…2 x 2.5mm²). The contactor can perform an average of 10 million no-load operating cycles without mechanical failure. The XCRE58 limit switch is made of a zinc alloy body. It weighs 1.135kg and measures 95mm in height, 85mm in width, and 75mm in depth. This limit switch complies with CSA and CCC standards, and its protection level complies with IP54 (protected against dust limited ingress and water sprayed). Telemecanique Sensors limit switches are ideal for industrial environments : they are precise, robust, reliable, easy to install and offer high repeatability. A limit switch is a device that converts a mechanical motion into an electrical control signal.
11
People watching this product now!
SKU:
XCRE58
Category: Crane Limit Switch
Description
Range of product | OsiSense XC |
---|---|
Series name | Special format |
Product or component type | Limit switch |
Product specific application | For hoisting and mechanical handling applications |
Device short name | XCR |
Sensor design | – |
body type | Fixed |
Head type | Rotary head |
Material | Metal |
Fixing mode | By the body |
Movement of operating head | Rotary |
Type of operator | Stay put crossed rods lever metal square rod 6 mm |
Type of approach | Lateral approach, 2 directions |
Electrical connection | Screw-clamp terminals, clamping capacity: 1 x 0.5…2 x 2.5 mm² |
Number of poles | 4 |
Contacts type and composition | 2 x (1 NC + 1 NO) |
Contact operation | Slow-break, break before make |
Contact block per direction [control circuit] | 2 per direction |
Positive opening | With |
Body material | Zinc alloy |
---|---|
Switch actuation | By any moving part |
Cable entry | 1 entry tapped for Pg 13.5 cable gland, cable outer diameter: 9…12 mm conforming to NF C 68-300 |
Contacts insulation form | Zb |
Number of steps | 1 |
Positive opening minimum torque | 0.7 N.m |
Minimum torque for tripping | 0.6 N.m |
Minimum actuation speed | 6 m/min |
Maximum actuation speed | 1.5 m/s |
Maximum displacement angle | 90 ° -90 ° |
Contact code designation | A300, AC-15 (Ue = 240 V), Ie = 3 A conforming to EN/IEC 60947-5-1 appendix A Q300, DC-13 (Ue = 250 V), Ie = 0.27 A conforming to EN/IEC 60947-5-1 appendix A |
[Ui] rated insulation voltage | 300 V conforming to UL 508 500 V (pollution degree 3) conforming to IEC 60947-1 500 V (pollution degree 3) conforming to VDE 0110 300 V conforming to CSA C22.2 No 14 |
Maximum resistance across terminals | 25 MOhm conforming to IEC 60255-7 category 3 |
[Uimp] rated impulse withstand voltage | 6 kV conforming to IEC 60664 6 kV conforming to IEC 60947-1 |
Short-circuit protection | 10 A cartridge fuse, type gG |
Electrical durability | 5000000 cycles, DC-13, inductive load type, 120 V, 4 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C 5000000 cycles, DC-13, inductive load type, 24 V, 7 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C 5000000 cycles, DC-13, inductive load type, 48 V, 10 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C |
Mechanical durability | 10000000 cycles |
Width | 85 mm |
Height | 95 mm |
Depth | 75 mm |
Net weight | 1.135 kg |
Terminals description ISO n°1 | (13-14)NO (21-22)NC |
Shock resistance | 68 gn conforming to IEC 60068-2-27 |
---|---|
Vibration resistance | 9 gn (f= 10…500 Hz) conforming to IEC 60068-2-6 |
IP degree of protection | IP54 conforming to IEC 60529 |
Overvoltage category | Class I conforming to IEC 61140 Class I conforming to NF C 20-030 |
Ambient air temperature for operation | -25…70 °C |
Ambient air temperature for storage | -40…70 °C |
Protective treatment | TC |
Product certifications | CCC CSA |
Standards | IEC 60204-1 IEC 60947-5-1 CSA C22.2 No 14 EN 60204-1 EN 60947-5-1 NF C 79-130 |
Unit Type of Package 1 | PCE |
---|---|
Number of Units in Package 1 | 1 |
Package 1 Height | 8.6 cm |
Package 1 Width | 20.6 cm |
Package 1 Length | 10.2 cm |
Package 1 Weight | 1.04 kg |
Unit Type of Package 2 | S02 |
Number of Units in Package 2 | 5 |
Package 2 Height | 15.0 cm |
Package 2 Width | 30.0 cm |
Package 2 Length | 40.0 cm |
Package 2 Weight | 5.578 kg |
Warranty | 18 months |
---|
Additional information
Brand |
Schneider |
---|
Get Offer
Shipping & Delivery
