60-33A Run Off Switch
Thermo Ramsey Run Off Switches are made of aluminum alloy has been designed for a maximum of safe operation under severe conditions to become installed in any bulk handling system (e.g. in open pit mines). All external parts are either of stainless steel or have been specially plated. The trip points – both preset at 10° – can be adjusted between 5° and 35°. Output options are 1NC+1NO and 2NC . 60-33a ramsey switch
60-33A Run Off Switch product information
60-33a is a legacy Thermo Ramsey belt run-off/drift switch used to signal conveyor-belt deviation. In the manufacturer’s Pro-Line operating principle, a belt moving away from its normal path contacts a roller actuator and changes the switch output.
Manufacturer-documented specifications
- Product duty: conveyor belt run-off/drift monitoring.
- Roller-lever actuation converts belt displacement into an electrical alarm/control signal.
- Installation is made adjacent to the belt so the roller is contacted only after the selected belt deviation.
- This is a legacy model; use the original nameplate or model-specific drawing for contact rating, angle and cable entry.
Manufacturer source: Thermo Scientific Ramsey Pro-Line EMEA conveyor protection switch data sheet
