20-35-NM-DIN Thermo Ramsey Tilt Switch Sensor

20-35-NM-DIN Thermo Ramsey Tilt Switch Sensor

35000007 Design: Plastic housing for DIN rail mounting Mains: 115/230 VAC, 50/60 Hz Alarm output: 1 NO contact, 2 A at 115/230 VAC, 3 A at 24 VDC, non-inductive fault output: 1 N/O contact, 2 A at 115/230 VAC, 3 A at 24 VDC, non-inductive Time delay: 1, 2, 4 or 6 seconds, adjustable Dimensions: LxWxD 112 x 45 x 119 mm Operating temperature: -40 °C… +50 °C Degree of protection: IP 20 (NEMA 1) Regulations: CSA, CE

The Thermo ScientificTM RamseyTM Mercury- Free Tilt Sensor uses advanced technology inside the tilt probe to replicate the same performance found in traditional mercury- based Thermo Scientific Ramsey Tilt Switches. A combination of opto-electronics and solid state circuitry inside the probe prevents jitter and provides stability not found in the typical non-mercury options.

The precision manufacturing of the tilt probe provides sensing of a 15 degree inclination in a full 360 degrees of direction. Multiple models of the tilt probe are available for applications with a wide variety of materials and environmental conditions (see inside for a description of the available options). All probes have fully encapsulated electronics and come with the necessary mounting hardware.

The field-mount control unit includes
the traditional green “Normal” and red “Alarm” indicators with LED illuminators
(a DIN mount control is also available).
The DPDT relay contacts give you two normally open and two normally closed connections for your external alarms and/or controls. An internal jumper allows you to select whether “Normal” is a horizontal
or a tilted position. An adjustable time delay inside the control prevents a momentary tilting of the probe from causing a false
or premature contact transfer. Interruption of line power will cause a contact transfer.