SEL 011 Conveyor Belt Misalignment Switch
KIEPE belt misalignment switches of type SEL are designed for heavy duty application and used at fixed belt conveyors according to DIN EN 620 requirements in order to keep the risk of uninten- tional operation as low as possible. The lateral movement of the conveyor belt is monitored and by switching off the conveyor in the case of unacceptable belt drift, the belt monitoring prevents damage and destruction of the belt and the machine.
10
People watching this product now!
Description
APPLICATION
KIEPE belt misalignment switches of type SEL are designed for heavy duty application and used at fixed belt conveyors according to DIN EN 620 requirements in order to keep the risk of uninten- tional operation as low as possible. The lateral movement of the conveyor belt is monitored and by switching off the conveyor in the case of unacceptable belt drift, the belt monitoring prevents damage and destruction of the belt and the machine.
OPERATION
Inadmissible belt drift occurs when the belt edge approaches the end of the supporting rollers through lateral movement and sur- passes it. Then the actuator (roller lever) is operated and displaced. In the case of displacement of the actuator, the cam operating switches are activated.
TECHNICAL DATA
The Kiepe misalignment switch type SEL complies with the Low Voltage Directive 2006/95/EC. It features a robust cast iron housing and is equipped with 2 force-actuated changeover con- tacts with snap-action function with two settable switching points.
Note: The misalignment switch may only be used in control circuits
The switching angle can be set via an adjustable camshaft. In this way, a pre-warning can be implemented in addition to the safety shutdown. As soon as the belt moves correctly , the roller lever will automatically return to its home position.
|
Designation |
Misalignment Switch Type SEL |
|
Type of actuation |
Bidirectional |
|
Complies with |
DIN EN 60204-1 DIN EN 60947-5-1 EN 620 |
|
Suited for |
Control units and systems in accordance with DIIN EN 60204 |
|
Mechanics |
|
|
Enclosure |
Cast iron: EN-GJL-200 |
|
Finish |
DD-paint yellow, RAL 1004 |
|
Actuating lever |
Stainless steel; ∅ 50.5 mm, ball-beared roller |
|
Mounting |
2 slotted holes for M10-screws |
|
Installation position |
Horizontal, tilt angle up to about 30° |
|
Deflection of roller lever |
Maximum +/-75° |
|
Mechanical reliability |
> 10,000 actuations |
|
Weight |
5.5 kg |
|
Electrical system |
|
|
Switching system |
2 changeover contacts (SPDT with snap action); |
|
Switching range |
5°…15° and 15°…35°, adjustable, factory set at 10 degrees each |
|
Cable entry |
Threaded holes 2x M25x1,5 with each |
|
Utilization category |
AC-15: 230 V; 1.5 A DC-13: 60 V; 0.5 A DC-13: 24V; 2A |
|
Connection cross section |
1mm2 to2,5mm2 |
|
Protective conductor connection |
in the casing; M4; Class I: protective earthing |
|
Rated insulation voltage Ui |
250 V |
|
Rated impulse withstand voltage Uimp |
2.5 kV; degree of polution III |
|
Conventional thermal current Ith |
6A |
|
Contact reliability |
30,000 operations with 100% Ie |
|
Ambient conditions |
|
|
Permissible ambient temperature |
– 25°C… +70°C |
|
Protection rating |
IP65 / IP67 in accordance with EN 60529 |
|
SELECTION TABLE |
|||||
|
Type |
Contact configuration |
Extended temperature range –40°C …+70°C |
Ventilation membran |
Order number |
|
|
SPDT |
|||||
|
LI |
|||||
|
SEL 011 |
2 |
92.056 979.011 |
|||
Spare parts and accessories:
Cable gland M25x1,5; sealing area ∅ 11mm to ∅ 16 mm Cover SEL
MOUNTING
Type SEL 1 misalignment switches are fastened in installation position on a substructure with 2 M10 screws each. In the case of misalignment, the belt 2 must not leave the lateral guide rollers. The position of the misalignment switches shall be chosen such that the belt 2 makes contact with the actuation roller of the mis- alignment switch preferably perpendicularly. The actuation roller of the misalignment switch is not touched during normal operation.
113.52.02.20.01 93.067 453.001
The roller lever can be replaced and can be affixed freely in the directions of rotation on the switch axis.
The electrical connection is made directly at the screw joints of the switching elements in the housing via the cable gland, included in the delivery. A second cable gland is possible when replacing the screw plug on the opposite site.
|
Screw plug; M25 x 1,5 |
113.52.87.20.02 |
|
Roller lever, stainless steel, ∅ 50,5 mm |
93.055 201.101 |
|
MOUNTING DIAGRAM |
 
1 Misalignment Switch 2 Belt 2 3 Sketch of conveyor with support rollers and belt 1 |
Additional information
| Brand |
KIEPE ELECTRIC |
|---|
Get Offer
Shipping & Delivery
