RAMUN3G-10TC3 is a 10.000KG (10T) C3 LOADCELL. It is used on conveyor belt weighing systems. Also called RAMUN 3G-10TC3 Loadcell
Ramsey 10-14 Weighbridges Specifications Weigh Span Three- or four-idler suspension; 2,743 mm (108 in) minimum weigh span Clearance Requirements Fits any standard conveyor; No space required above belt line Idlers Normally furnished by customer; Thermo Fisher Scientific can supply idlers upon request Conveyors Sizes 457 mm to 2,134 mm (18 in to 84 in) or 400 mm to 2,000 mm (15.75 in to 78.75 in) belt widths Weighbridge Construction Mechanical steel tubing Weighbridge Mounting Eight bolts (four per support beam) to conveyor stringers Ramsey 2301-D Load Cell Digitizer/Exciter Specifications Digitizer Type Continuous electronic load cell to digital signal digitizing Enclosure NEMA 4, 14-gauge steel Circuit Construction “68332” 32-bit microprocessor with up to 512 Kb ROM (program) and 512 Kb RAM Power Requirements 115/230 VAC selectable, 50/60 Hz Communication Input/Output 600, 9600, 19.2 k, 38.8 k baud RS-485; Compatible with Ramsey Micro-Tech 2301 or Ramsey Micro-Tech 2201 Integrators Digital Input/Output Sockets for four OPTO-22 I/O modules Calibration None required Operating Temperature -40°C to +50°C (-40°F to +122°F) Temperature Sensitivity -10°C to +50°C (+14°F to +122°F): Zero: 0.15 µV/°C (0.08 µV/°F) maximum Span: 4 ppm/°C (2.22 ppm/°F) maximum -40°C to -10°C (-40°F to +14°F): Zero: 0.15 µV/°C (0.08 µV/°F) maximum Span: 8 ppm/°C (4.44 ppm/°F) maximum Accuracy Within 0.044% of load cell capacity over full temperature range of -40°C to +50°C (-40°F to +122°F); Within 0.022% of load cell capacity over full temperature range of -10°C to +50°C (+14°F to +122°F) Linearity Better than 0.01% of net, for inputs from 0 to 105% of full scale Speed Input 0-2000 Hz; Compatible with Ramsey 60 Series Speed Sensors Isolation Load cell and speed sensor inputs are optically isolated from other circuits Load Cells Quantity Four load cells in parallel Enclosure Environmentally-protected “S” type cell Mounting Tension Excitation 10 VDC ±5% Output 3 mV/V ±0.1% Non-Linearity < 0.03% FS Non-Repeatability 0.1% FS Hysteresis < 0.02% FS Operating Temperature -54°C to +93°C (-65°F to +200°F) Temperature Sensitivity Span 0.0014% FS/°C (0.0008% FS/°F) Zero 0.0027% FS/°C (0.0015% FS/°F) Overload Safe to 150% of load cell capacity; Ultimate to 300% FS; Sideload 50% FS Rating FM Approved for Class II, Div. 1 & 2, Groups E, F & G; NTEP Type III, 5000 divisions; OIML Ramsey 61-12 Digital Speed Sensor Type Digital, brushless Mounting Direct to 15.88 mm (0.625 in) diameter stub shaft on tail pulley, bend pulley, or return roll Housing Weather-tight, epoxy finish, cast aluminum Mounting Hardware Supplied with coupling, restraint arm and restraint spring Shipping Weight 3.6 kg (8 lb) Approvals FM Approved for Class I, Div. 2, Group D; Class II, Div. 1 & 2, Groups E, F & G